Connect a new screen with its activation code

When impressPlayer starts on a new screen, it shows a 6-digit activation code (and usually a QR code). You use that code once to link the screen to your account.

Steps

1. Make sure impressPlayer is installed and running on the screen (see impressPlayer install guides). It shows a 6-digit code (and usually a QR code).

   

   Activation code on the screen

   
   

2. In the dashboard, open the device list from the right edge and choose Add new device at the bottom.

   

   Add new device

   
   

3. Enter the 6-digit code and press → or enter. A setup window opens (shown above) where you can set the screen's working hours (when it turns on and off) and assign it to one or more tags for grouping. Set these if you want, then save — the device appears in the list and goes online within a few moments.

   

   Configure new device

   
   

Tip: If you are using the assistant and you send it just six numbers, it treats them as an activation code.

After connecting

• The device starts with no playlist - publish one to it (see Put a playlist on your screens (publishing)).

• You can change its working hours or tags at any time later (see Set working hours so screens turn on/off automatically and Organising devices with tags).

Removing a device

When a screen is decommissioned, you can remove it from your account. This is permanent — a removed device isn't kept in the Trash Bin and can't be restored. Removing unlinks the device (your playlists and content stay untouched), and the physical screen can later be set up again from scratch with a new activation code.

There's no delete button in the device list. To remove a device, contact support@digital-signage.lt, or ask the assistant to delete it (for example, "delete the device named Lobby"). Because removal is permanent, double-check the screen name before confirming.